top of page
ХЕДДЕР-АНГЛ-новый.jpg

Neftyanaya Provintsiya 

No.4(20),2019

TECHNICAL ASPECTS OF CASING CEMENTING WITH SIMULTANEOUS ROTATION

F.F. Akhmadishin, A.R. Iskhakov, I.V. Lvova, A.V. Abakumov

DOI https://doi.org/10.25689/NP.2019.4.300-308

PP.300-308

Download article

Adobe_PDF_Icon.png
Abstract
References

Abstract

Good-quality cementing is achieved when drilling mud is replaced completely with cement slurry. Construction of directional wells is often accompanied by presence of bottlenecks at pipe-borehole contact points restricting the flow of drilling mud. The most effective technique to solve this problem is rotation of the casing string during cementing. Numerous bench tests and simulation studies confirmed that casing rotation can improve replacement of drilling mud with cement slurry. However, this is not a commonly used practice. This is primarily due to lack of specialized wellhead equipment and threaded joints load limitation. The paper reviews the development of casing-rotation-while-cementing technology in PJSC TATNEFT. The first casing rotation operations were performed in heavyoil horizontal wells drilled using slant drilling rigs. Application of a rotating cementing head enabled continuous casing rotation with no need for shutdowns to squeeze the cement plug and significantly improved cementing quality. For large-scale implementation of the casing rotation technique, a versatile rotating cementing head has been manufactured for cementing of 102-168-mm casing strings. Experience has shown that the key barrier for nonstop casing rotation during cementing jobs is torque limitation for buttress thread connections. Another limiting factor is the effect of torque and drag accompanied by the increased hook load, resulting in casing rotation stoppage. Nevertheless, acoustic and gamma-gamma cement-bond logs prove beneficial effect of casing rotation in obtaining a homogeneous cement sheath.

Key words:

casing cementing, casing rotation, cementing head, cementing quality, zonal isolation

References

  1. Robert C. Smith. Amoco Production. Co. Tulsa. Checklist aids successful primary cementing. Oil and Gas Journal, 1982, No. 1, Vol. 80, 30-33 pp. (in English)

  2. Yuhuan Bu, Leiju Tian, Zhibin Li, Rui Zhang, Chunyu Wang, Xucai Yang. Effect of casing rotation on displacement efficiency of cement slurry in highly deviated wells. Available at: https://www.sciencedirect.com/science/article/pii/S1875510018300544 (in English)

  3. Кrylov D.А. Vliyanie raskhazhivaniya i vrashcheniya kolonny na kontakt tsementnogo kamnya s obsadnymi trubami [Effects of casing reciprocation and rotation on cement-tocasing bond]. Stroitel'stvo neftyanykh i gazovykh skvazhin na sushe i na more, 1993, No. 6-7, p. 14. (in Russian)

  4. Ashrafyan М.О., Nizhnik А.Е. Otsenka vozmozhnosti vrashcheniya i raskhazhivaniya obsadnykh kolonn pri tsementirovanii skvazhin [Assessing the possibility of casing reciprocation and rotation during cementing]. Bureniye I neft’, 2011, No. 9, pp. 16-19. (in Russian)

  5. Ryabokon’ S.A., Milshtein V.M., Lazarenko A.V. Ustroystvo dlya vrashcheniya obsadnoy kolonny v protsesse ee tsementirovaniya [Apparatus for casing rotation during cementing]. Neftyanoye Khozyaistvo, 2006, No. 5, pp. 72-73. (in Russian)

  6. Akmadishin F.F., Kirshin A.V., Iskhakov A.R., Zaripov I.M., Zaripov A.M. Razrabotka ustrojstva dlya vrashcheniya ekspluatatsionnoy kolonny pri ee tsementirovanii [Development of apparatus for production casing rotation during cementing operations]. Collection of research papers of TatNIPIneft Institute – PJSC TATNEFT, 2016, Issue 84, pp. 120-122. (in Russian)

  7. Shafigullin R.I., Akmadishin F.F., Zaripov I.M., Kirshin A.V., Iskhakov A.R., Universal'naya tsementirovochnaya golovka [Universal cementing head]. Collection of research papers of TatNIPIneft Institute – PJSC TATNEFT, 2018, Issue 86, pp. 233-237. (in Russian)

  8. Shafigullin R.I., Kurinov A.I., Akmadishin F.F. et al. Povyshenie kachestva krepi skvazhiny putem tsementirovaniya obsadnoy kolonny s vrashcheniem [Improving cementing quality through casing cementing with pipe rotation]. Neftyanoye Khozyaistvo, 2019, No. 7, pp. 24-26. (in Russian)

Authors

F.F. Akhmadishin, PhD, Head of Drilling Department, TatNIPIneft Institute – PJSC TATNEFT

40, M.Djalil st., Bugulma, 423326, Russia Federation

E-mail: ffa@tatnipi.ru

A.R. Iskhakov, Junior Research Associate, Well Casing Laboratory, TatNIPIneft Institute – PJSC TATNEFT

40, M.Djalil st., Bugulma, 423326, Russia Federation

E-mail: krep@tatnipi.ru

I.V. Lvova, PhD, Scientific Secretary, TatNIPIneft–PJSC TATNEFT

40, M.Djalil st., Bugulma, 423326, Russia Federation

E-mail: dis@tatnipi.ru

A.V. Abakumov, Technician Engineer, Well Cementing and Trouble Zone Isolation Sector, Well Construction Administration – PJSC TATNEFT

75, Lenin st., Almetyevsk, 423400, Russia Federation

E-mail: AbakumovAV@tatneft.ru

For citation:

F.F. Akhmadishin, A.R. Iskhakov, I.V. Lvova, A.V. Abakumov Tehnicheskie aspekty cementirovanija obsadnyh kolonn s odnovremennym vrashheniem [Technical aspects of casing cementing with simultaneous rotation]. Neftyanaya Provintsiya, No. 4(20), 2019. pp. 300-308. https://doi.org/10.25689/NP.2019.4.300-308 (in Russian)

Key words
Authors
For citation

   © F.F Akhmadishin., A.R. Iskhakov, I.V. Lvova, A.V. Abakumov, 2019

       This is an open access article under the Creative Commons Attribution 4.0 License (https://creativecommons.org/licenses/by/4.0/)

bottom of page